HARDWARE & GRILLS
HARDWARE & GRILLS
-
HDLIDGSKT- 8″ LID Gasket
HDLIDGSKT- 8″ LID Gasket
- Lid Gasket
- Will fit following Cicada Audio and OEM H-D products:
-
- 14CHDLID8
- 14CHDLID8R
- OEM 14-23 Harley Davidson Lids
- Upcoming Cicada Audio Lid products
-
- Reduces vibration
- Provides a better air tight seal, when lid closes on the saddle bags
- Sold in pairs
-
CHD69MHD-6×9″ Midbass Plastic Bag Dividers
6X9″ Midbass Plastic Dividers
- CM series
- For Saddle Bags to be used with 8″ or 10″ Pro Midbass Drivers
- Sold in Pairs
-
CHDCXXO Passive Crossovers-CHX Series
Passive Crossovers-CHX Series
- External 12dB passive crossover
- -3/-6 tweeter attenuator built-in
- 4K crossover point
- Sold in pairs
-
CHDCHXO Passive Crossovers-CH Series
CH Series Passive Crossovers
- External 12dB Passive crossover
- Tweeter attenuator resistor
- 4K crossover point
- Older Style
- Sold in pairs
-
SOLD OUTCRT1- Tweeter Diaphragm Replacement for RR1T
CRT075- Tweeter Diaphragm Replacement
SOLD INDIVIDUALLY
- 1.0” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
- 4 ohms
- For RR075T
-
CRT3- Tweeter Diaphragm Replacement for RR3T
CRT3- Tweeter Diaphragm Replacement
SOLD INDIVIDUALLY
- 3.0” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
- 8 ohms
- For RR3T
-
CRT075- Tweeter Diaphragm Replacement for RR075T
CRT075- Tweeter Diaphragm Replacement
SOLD INDIVIDUALLY
- 1.0” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
- 4 ohms
- For RR075T
-
CHT175-CHX Series Tweeter Diaphragm Replacement
CHX Series Tweeter Diaphragm Replacement
- 1.75-inch/44mm Tweeter Diaphragm
- Tweeter Dome: Aluminum
- 8 ohm
- Replacement for CHX65, CHX69, CHX8
SOLD INDIVIDUALLY
-
CHT14-CH Series Tweeter Diaphragm Replacement
CH Series Tweeter Diaphragm Replacement
- 1.4” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
- Specifically for CH65, CH69, and CH8
- 8 ohm
SOLD INDIVIDUALLY
-
14HDAR-SG 2014 + H-D® Street Glide® Amplifier Rack
Amplifier Mounting Rack for 2014-2023 H-D® Street Glide®
HASSLE-FREE INSTALLATION
Velcro® mount amp to stainless steel tray between the head unit and the headlight.
- Powder coated
- Stainless steel construction
- Mounting hardware included
- Designed for CX/FLX/DSP600.4D style amplifiers only
-
14HDAR-RG 2014 + H-D® Road Glide® Amplifier Rack
Amplifier Mounting Rack for 2014-2023 H-D® Road Glide®
HASSLE-FREE INSTALLATION
Mount amp to stainless steel chassis and easily slide in under the fairing mounted radio.
NOTE: Place amplifier input side toward the driver, power and ground input toward the headlight!
- Powder coated
- Stainless steel construction
- Mounting hardware included
- Designed for CX/FLX/DSP600.4D style amplifiers only
-
CHD8HD-8″ Plastic Bag Dividers
8″ Plastic Bag Dividers
- Custom Molded High-Grade ABS
- CH/CHX/CM series
- for Saddle Bags to be used with 8″ or 10″ Pro Mid-bass Drivers
- Sold in pairs
-
14HDRING10T- Direct-Fit Template Kit for 14HDRING10
14HDRING10T
Direct-Fit Pro Mid-Bass/Woofer/Port Template Kit (L/R)
Cicada Audio® American designed exclusively for Harley-Davidson
Engineered for CMB10.S4 & CMB8.S4 (sold separately)
Kit includes:
Custom Molded High-Grade ABS Templates
-Form-fitted to Saddlebag (L/R)
-Traces for speaker cut out for either CMB8.S4 & CMB10.S4
-Guidelines for HDPORT3-speaker port cut out
Saddlebag Brace Templates (L/R)
-Alignment guides to trace drill out holes for bag brace
REQUIRED TO COMPLETE INSTALL- 14HDRING10 (sold separately)
-
14HDRING10- Complete 10″ Pro Mid-Bass/Woofer Cut-In Kit for Left & Right Saddlebags
14HDRING10
Complete 10-inch Pro Mid-Bass/Woofer Cut-In Kit for Left & Right Saddlebags
Cicada Audio® American designed exclusively for Harley-Davidson
Engineered for CMB10.S4 (sold separately)
Kit includes:
Aluminum Bag Brace
Powder Coated Stamped Steel Grill
Custom Molded High-Grade ABS 10” Mounting Ring
Form-fitted rubber gaskets
Stainless Steel Hardware
– Mounting Screws with Loctite®
– Screw Inserts on mounting ring
Custom designed Saddle Bag Rubber/Aluminum Grommets
Pre-cut aluminum backed damping material for inside saddle bag/lid
-Reduces, Rattles, Vibrations, Increases Bass Output
Everything works with OEM locking mechanisms, hinges, and hardware
REQUIRED TO COMPLETE INSTALL- 14HDRING10T (sold separately)
(don’t forget to purchase HDPORT3- 3” Port sold separately)
Click Link below for Install Guide:
-
14CHDLID8- 2014-2023 H-D(r) 8″ LID KIT
14CHDLID8
H-D® 2014-2023 8-inch Lid Kit
Vivid Black Finish
8-inch Speaker Hard Dividers
8-inch Billet Grill Kit (included)
Works with CH, CM, CHX / Power coated metal grill / Billet Aluminum ring
Click Link below for Install Guide:
-
HDPORT3- 3″ Right Angled Port
HDPORT3- 3″ Right Angled Port
HDPORT3
3″ Flushed mount right angled port
Designed for CMB8.S4 and CMB10.S4
Port Solution for 2014-2023 HD Saddle Bags
-
CHD69HD-6×9″ Plastic Bag Dividers
6X9″ Plastic Dividers
- CH/CHX series
- For Saddle Bags to be used with 8″ or 10″ Pro Midbass Drivers
- Sold in Pairs
-
SPACER65-075 6.5″ 3/4 INCH SPACER RING
SPACER65-075
- 6-1/2 inch spacer
- Gives 3/4 inch extra depth
- Works with all 6.5″ Cicada Audio(r) Speakers
- One pair of adapters included in each package
-
SPACER65-05 6.5″ 1/2 INCH SPACER RING
SPACER65-05
- 6-1/2 inch spacer
- Gives 1/2 inch extra depth
- Works with all 6.5″ Cicada Audio(r) Speakers
- One pair of adapters included in each package
-
C65G – Custom Tooled Grill for Cicada Audio 6.5″ Speakers – Pair
C65G CICADA AUDIO SPEAKER GRILLS – PAIR
Fits all Cicada Audio 6.5″ speakers.